HPAVC/HPAVC CD-ROM.iso/CPTUTT22.ZIP/CHAP04.TXT

Text File | 1992-01-20 | 22KB | 472 lines

                                                        Chapter 4
                                                        FUNCTIONS

This chapter discusses enhancements in the capabilities of
functions that have been made to C++.  These changes make
programming more convenient and permit the compiler to do further
checking for errors.  A fair amount of time is also spent in this
chapter teaching the modern form of function definition and
prototyping.

Prototyping allows the compiler to do additional type checking for
your function calls which can detect some programming errors.  The
first two example programs in this chapter are designed to teach
prototyping and what it will do for you.  Prototyping is a
relatively new addition to C, so even some experienced C
programmers are not familiar with it.  If you have experience with
prototyping you can skip directly to the section named PASS BY
REFERENCE on page 4-4 of this chapter.


PROTOTYPES
_________________________________________________________________

Examine the file named PROTYPE1.CPP for our      ================
first look at a prototype and an illustration of   PROTYPE1.CPP
how it is used.  The prototyping used in C++ is  ================
no different than that used in ANSI-C.
Actually, many C programmers take a rather dim
view of prototyping and seem reluctant to use it, but with C++ it
is considerably more important and is in much heavier use.  In
fact, prototyping is required to be used in some situations in C++.

A prototype is a limited model of a more complete entity to come
later.  In this case, the full function is the complete entity to
come later and the prototype is illustrated in line 4.  The
prototype gives a model of the interface to the function that can
be used to check the calls to the function for the proper number
of parameters and the correct types of parameters.  Each call to
the function named do_stuff() must have exactly three parameters
or the compiler will give an error message.  In addition to the
correct number of parameters, the types must be compatible or the
compiler will issue an error message.  Notice that when the
compiler is working on lines 12 and 13, the type checking can be
done based on the prototype in line 4 even though the function
itself is not yet defined.  If the prototype is not given, the
number of parameters will not be checked, nor will the types of the
parameters be checked.  Even if you have the wrong number of
parameters, you will get an apparently good compile and link, but
the program may do some very strange things when it is executed.


                                                         Page 4-1

                                            Chapter 4 - Functions


To write the prototype, simply copy the header from the function
to the beginning of the program and append a semicolon to the end
as a signal to the compiler that this is not a function but a
prototype.  The variable names given in the prototype are optional
and act merely as comments to the program reader since they are
completely ignored by the compiler.  You could replace the variable
name wings in line 4 with your first name and there would be no
difference in compilation.  Of course, the next person that had to
read your program would be somewhat baffled with your choice of
variable names.

In this case, the two function calls to this function, given in
lines 12 and 13, are correct so no error will be listed during
compilation.

Even though we wish to use the char type for eyes in the function,
we wish to use it as a number rather than as a character.  The cast
to int in line 20 is required to force the printout of the
numerical value rather than an ASCII character.  The next example
program is similar but without the cast to int.



COMPATIBLE TYPES
_________________________________________________________________

We mentioned compatible types earlier so we should review them just
a bit in order to make our discussion of prototyping complete.
Compatible types are any simple types that can be converted from
one to another in a meaningful way.  For example, if you used an
integer as the actual parameter and the function was expecting a
float type as the formal parameter, the system would do the
conversion automatically, without mentioning it to you.  This is
also true of a float changing to a char, or a char changing to an
int.  There are definite conversion rules which would be followed.
These rules are given in great detail in section 3.2 of the draft
of the ANSI-C standard and are also given on page 198 of the second
edition of the K&R reference.

If we supplied a pointer to an integer as the actual parameter and
expected an integer as the formal parameter in the function, the
conversion would not be made because they are two entirely
different kinds of values.  Likewise, a structure would not be
converted automatically to a long float, an array, or even to a
different kind of structure, they are all incompatible and cannot
be converted in any meaningful manner.  The entire issue of type
compatibility as discussed in chapter 2 of this tutorial applies
equally well to the compatibility of types when calling a function.
Likewise, the type specified as the return type, in this case void,
must be compatible with the expected return type in the calling
statement, or the compiler will issue a warning.



                                                         Page 4-2

                                            Chapter 2 - Functions


HOW DOES PROTOTYPING WORK?
_________________________________________________________________

This is your chance to try prototyping for yourself and see how
well it works and what kinds of error messages you get when you do
certain wrong things.  Change the actual parameters in line 12 to
read (12.2, 13, 12345) and see what the compiler says about that
change.  It will probably say nothing because they are all type
compatible.  If you change it to read (12.0, 13), it will issue a
warning or error because there are not enough arguments given.
Likewise you should receive an error message if you change one of
the parameters in line 13 to an address by putting an ampersand in
front of one of the variable names.  Finally, change the first word
in line 4 from void to int and see what kind of error message is
given.  You will first be required to make the function header in
line 16 agree with the prototype, then you will find that there is
not a variable returned from the function.  You should have a good
feeling that prototyping is doing something good for you after
making these changes.

Be sure to compile and execute this program then make the changes
recommended above, attempting to compile it after each change.



A LITTLE MORE PROTOTYPING
_________________________________________________________________

Examine the next example program named           ================
PROTYPE2.CPP for a little more information on      PROTYPE2.CPP
prototyping.  This program is identical to the   ================
last one except for a few small changes.  The
variable names have been omitted from the
prototype in line 4 merely as an illustration that they are
interpreted as comments by the C++ compiler.  The function header
is formatted differently to allow for a comment alongside each of
the actual parameters.  This should make the function header a
little more self explanatory.  However, you should remember that
comments should not be used to replace careful selection of
variable names.  In this particular case, the comments add
essentially nothing to the clarity of the program.



WHAT DOES PROTOTYPING COST?
_________________________________________________________________

Prototyping is essentially free because it costs absolutely nothing
concerning the run time size or speed of execution.  Prototyping
is a compile time check and slows down the compile time a
negligible amount because of the extra checking that the compiler
must do.  If prototyping finds one error for you that you would
have had to find with a debugger, it has more than paid for itself

                                                         Page 4-3

                                            Chapter 4 - Functions

for use in an entire project.  I once spent 12 hours of debugging
time to find that I forgot to pass the address of a variable to a
function.  Prototyping would have found the error on the first
compilation of this 2000 line program.

The only price you pay to use prototyping is the extra size of the
source files because of the prototypes, and the extra time for the
compiler to read the prototypes during the compilation process, but
both costs are negligible.

Be sure to compile and execute this example program.  You will find
that it is identical to the last example program.


PASS BY REFERENCE
_________________________________________________________________

Examine The file named PASSREF.CPP for an         ===============
example of a pass by reference, a construct         PASSREF.CPP
which is not available in ANSI-C.  The reference  ===============
variable was mentioned in chapter 1 and it was
recommended there that you don't use it in the
manner illustrated there.  This example program illustrates a
situation where it can be used to your advantage.  The pass by
reference allows the passing of a variable to a function and
returning the changes made in the function to the main program.
In ANSI-C the same effect can be seen when a pointer to a variable
is passed to a function, but use of a reference variable is a
little cleaner.

Observe the prototype in line 4 where the second variable has an
ampersand in front of the variable name.  The ampersand instructs
the compiler to treat this variable just like it were passed a
pointer to the variable since the actual variable from the main
program will be used in the function.  In the function itself, in
lines 21 through 24, the variable in2 is used just like any other
variable but we are using the variable passed to this function from
the main program not a copy of it.  The other variable named in1
is treated just like any other normal variable in ANSI-C.  In
effect, the name in2 is a synonym for the variable named index in
the main program.

If you prefer to omit the variable names in the prototypes, you
would write the prototype as follows;

   void fiddle(int, int&);

If you are a Pascal programmer, you will recognize that the
variable named in1 is treated just like a normal parameter in a
Pascal call, a call by value.  The variable named in2 however, is
treated like a variable with the reserved word VAR used in front
of it usually referred to as a call by reference.  The reference
variable is actually a self dereferencing pointer which refers to,
or points to, the original value.

                                                         Page 4-4

                                            Chapter 4 - Functions

When you compile and execute this program, you will find that the
first variable got changed in the function but was returned to its
original value when we returned to the main program.  The second
variable however, was changed in the function and the new value was
reflected back into the variable in the main program which we can
see when the values are listed on the monitor.


DEFAULT PARAMETERS
_________________________________________________________________

Examine the file named DEFAULT.CPP for an         ===============
example of the use of default parameters in C++.    DEFAULT.CPP
This program really looks strange since it        ===============
contains default values for some of the
parameters in the prototype, but these default
values are very useful as we will see shortly.

This prototype says that the first parameter named length must be
given for each call of this function because a default value is not
supplied.  The second parameter named width, however, is not
required to be specified for each call, and if it is not specified,
the value 2 will be used for the variable width within the
function.  Likewise, the third parameter is optional, and if it is
not specified, the value of 3 will be used for height within the
function.

In line 11 of this program, all three parameters are specified so
there is nothing unusual about this call from any other function
call we have made.  Only two values are specified in line 12
however, so we will use the default value for the third parameter
and the system acts as if we called it with get_value(x, y, 3)
since the default value for the third value is 3.  In line 13, we
only specified one parameter which will be used for the first
formal parameter, and the other two will be defaulted.  The system
will act as if we had called the function with get_volume(x, 2, 3).
Note that the output from these three lines is reversed.  This will
be explained shortly.

There are a few rules which should be obvious but will be stated
anyway.  Once a parameter is given a default value in the list of
formal parameters, all of the remaining must have default values
also.  It is not possible to leave a hole in the middle of the
list, only the trailing values can be defaulted.  Of course, the
defaulted values must be of the correct types or a compiler error
will be issued.  The default values can be given in either the
prototype or the function header, but not in both.  If they are
given in both places, the compiler must not only use the default
value, but it must carefully check to see that both values are
identical.  This could further complicate an already very
complicated problem, that of writing a C++ compiler.

As a matter of style, it is highly recommended that the default
values be given in the prototype rather than in the function.  The

                                                         Page 4-5

                                            Chapter 4 - Functions

reason will be obvious when we begin using object oriented
programming techniques.


WHY IS THE OUTPUT SCRAMBLED?
_________________________________________________________________

When the compiler finds a cout statement, the complete line of code
is initially scanned from right to left to evaluate any functions,
then the data is output field by field from left to right.
Therefore in line 11, get_value() is evaluated with its internal
output displayed first.  Then the fields of the cout are displayed
from left to right with "Some box data is" displayed next.
Finally, the result of the return from get_value() is output in int
format, the type of the returned value.  The end result is that the
output is not in the expected order when lines 11 through 13 are
executed.  (The output is not what you would intuitively expect to
happen so appears to be a deficiency in the language.  A call to
Borland International, the writers of Turbo C++ and Borland C++,
verified that this is operating correctly.)

Lines 15 through 18 are similar to any two of the lines of code in
lines 11 through 13, but are each separated into two lines so the
output is in the expected order.

Be sure to compile and execute DEFAULT.CPP after you understand it.
Note that the funny output order will appear again later in this
tutorial.


VARIABLE NUMBER OF ARGUMENTS
_________________________________________________________________

Examine the program named VARARGS.CPP for an      ===============
illustration of the use of a variable number of     VARARGS.CPP
arguments in a function call.                     ===============

We have gone to a lot of trouble to get the
compiler to help us by carefully checking how many parameters we
use in the function calls and checking the types of the parameters.
On rare occasion, we may wish to write a function that uses a
variable number of parameters.  The printf() function is a good
example of this.  ANSI-C has a series of three macros available in
the "stdarg.h" header file to allow the use of a variable number
of arguments.  These are available for use with C++ also, but we
need a way to eliminate the strong type checking that is done with
all C++ functions.  The three dots illustrated in line 6 will do
this for us.  This prototype says that a single argument of type
int is required as the first parameter, then no further type
checking will be done by the compiler.

You will note that the main program consists of three calls to the
function, each with a different number of parameters, and the
system does not balk at the differences in the function calls.  In

                                                         Page 4-6

                                            Chapter 4 - Functions

fact, you could put as many different types as you desire in the
calls.  As long as the first one is an int type variable, the
system will do its best to compile and run it for you.  Of course
the compiler is ignoring all type checking beyond the first
parameter so it is up to you to make sure you use the correct
parameter types in this call.

In this case the first parameter gives the system the number of
additional parameters to look for and handle.  In this simple
program, we simply display the numbers on the monitor to illustrate
that they really did get handled properly.

Of course, you realize that using a variable number of arguments
in a function call can lead to very obscure code and should be used
very little in a production program, but the capability exists if
you need it.  Be sure to compile and execute this program.


FUNCTION NAME OVERLOADING
_________________________________________________________________

Examine the file named OVERLOAD.CPP for an       ================
example of a program with the function names       OVERLOAD.CPP
overloaded.  This is not possible in ANSI-C, but ================
is perfectly legal and in fact used quite
regularly in C++.  At first this will seem a bit
strange, but it is one of the keystones of object oriented
programming.  You will see its utility and purpose very clearly in
later chapters of this tutorial.

You will notice in this example program that there are three
functions, in addition to the main function, and all three have the
same name.  Your first question is likely to be, "Which function
do you call when you call do_stuff()?"  That is a valid question
and the answer is, the function that has the correct number of
formal parameters of the correct types.  If do_stuff() is called
with an integer value or variable as its actual parameter, the
function beginning in line 23 will be called and executed.  If the
single actual parameter is of type float, the function beginning
in line 28 will be called, and if two floats are specified, the
function beginning in line 34 will be called.

It should be noted that the return type is not used to determine
which function will be called.  Only the formal parameters are used
to determine which overloaded function will be called.


The keyword overload used in line 4 tells the system that you
really do intend to overload the name do_stuff, and the overloading
is not merely an oversight.  This is only required in C++ version
1.2.  C++ version 2.0 and greater do not require the keyword
overload but allows it to be used optionally in order to allow the
existing body of C++ code to be compatible with newer compilers.
It is not necessary to use this keyword because, when overloading

                                                         Page 4-7

                                            Chapter 4 - Functions

is used in C++, it is generally used in a context in which it is
obvious that the function name is overloaded.

The actual selection of which function to actually call is done at
compile time, not at execution time so the program is not slowed
down.  If each of the overloaded function names were changed to
different names, each being unique, there would be no difference
in execution size or speed of the resulting program.

Overloading of function names may seem very strange to you, and it
is strange if you are used to the rules of K&R or ANSI-C
programming.  As you gain experience with C++, you will feel very
comfortable with this and you will use it a lot in your C++
programming.

Note the use of the keyword const used in some of the function
prototypes and headers.  Once again, this prevents the programmer
from accidentally changing the formal parameter within the
function.  In a function as short as these, there is no real
problem with an accidental assignment.  In a real function that you
occasionally modify, you could easily forget the original intention
of the use of a value and attempt to change it during an extended
debugging session.


PROGRAMMING EXERCISES
_________________________________________________________________


1.   Change the type of wings in the prototype of PROTYPE1.CPP to
     float so that it disagrees with the function definition to see
     if you get a compilation error.

2.   Change the function definition in PROTYPE1.CPP to agree with
     the changed prototype.  Compile and execute the program
     without changing the calls in lines 12 and 13.  Explain the
     results.

3.   In DEFAULT.CPP, remove the default value from the prototype
     for height only to see what kind of compiler error you get.
     Only the last values of the list can be defaulted.

4.   In OVERLOAD.CPP, change the names of the three functions so
     that each is a unique name and compare the size of the
     resulting executable file with that given for the present
     program.









                                                         Page 4-8